Tag Archives: tutorial

  • Home
  • Posts tagged "tutorial"
    • ( Page2 )

YOJ09-25 Netted Pendant

Posted on by dianne

YOJ09-25 Netted Pendant (2009)
Netted Pendant (2009)
Fine silver, sterling silver
L 6.0 cm x W 2.5 cm

I’m running a bit behind with my YOJ postings, but I have been keeping up with doing the pieces.  My focus has been on preparing for my class, which starts 9 days from today!  This netted pendant is one of the projects for the class.

The good news is that I will get all of the tutorials done.  The bad news is that I have no idea if my wire is going to arrive in time!

Getting the supplies for these classes has really tested my patience. Back when I worked in the mining industry, the gentleman I worked for always reminded me to prepare for Murphy’s Law.  I’ve been reminded of that over and over in the last few weeks…

I do my best to support Canadian companies, partly because I believe in buying locally, but also because that way I don’t have to deal with the extra hassle of shipping, customs, duties and fluctuating exchange rates.

But some suppliers really make it a pain in the ass to deal with them.

Case in point:  John Bead, a trade-only wholesaler and beader’s heaven.  They would be an ideal Canadian supplier if they actually had the things I needed IN STOCK!!!  Three weeks ago I went to JB – my first visit in years – and I was reminded why I don’t bother to shop there unless I absolutely have to.  The warehouse is a frustrating jumble of aisles and bins.  Just finding things is the first challenge.  Then the flat nose pliers I wanted were out of stock.  I had to settle for a cheaper, lighter weight version.  The round nose pliers – every style – were out of stock.  The only pliers they did have in stock were their own house brand – at $20 a pop.  They didn’t have enough spools of 26 gauge copper wire, so I had to buy half of them in brass.  No 1.5 mm antique copper chain in stock.  Barely any 2 mm copper beads in stock.  This is a wholesaler, remember, with several thousand sq. feet of showroom space…

*If* they had had the pliers, I would have been well over their minimum purchase requirement.  As it was, I ended up having to visit their Swarovski room and buy a bunch of Swarovski crystals I didn’t really want or need to make up the difference.  And even there, the stock on some of the common colours was patheticly low!

So, if you’re in Canada, looking for wholesale Miyuki, Swarovski or Preciosa, John Bead is a go-to supplier if you can meet their minimum.  As for me, I think next year I’ll deal with the shipping costs, and customs charges, and just order from Rio Grande…

And increase the cost of the kit…I’m dealing with a very tight budget here, so that makes sourcing reasonably priced supplies problematic.

Thankfully, I found another supplier for the round nose pliers – Habsons Jeweller Supplies in Vancouver.  They had the quantity I needed in stock, and they had them packed and shipped the day after I ordered them.  This is the second time they’ve come through for me on a hard-to-find item.  Last year I bought a half dozen wooden ring mandrels from them – impossible to find elsewhere in Canada, but they had them.  I love these guys.  Great customer service.  Actually, maybe I’ll order from them first next year…

Next was the still-ongoing misadventure with the copper wire.

There are NO suppliers of shaped copper wire in Canada.  So, ordering from the US is required.

I placed my order in mid-June, with expected delivery in 10 business days.  The time came and went, and when I followed up this last week, I found out the supplier missed something on the paperwork.  The package had been returned and had sat in their warehouse for a week before being sent out again.  So now I’m sitting here hoping the package will arrive in the next few days.  If it’s not here by Tuesday, I have to re-order the whole lot (US$900+), and have it sent up here by express overnight courier.  Cost of the courier:  US$102.  *gloom*  And I have to re-source the cabochons because I cleaned them out of their 22×30 mm with my last order.   And then I’ll have two complete sets of the wire I need for the classes once the other order finally does arrive.  The owner is doing her best to be helpful, even taking time out of her vacation to deal with this for me.

In the meantime, I’m beavering away, working on tutorials, putting together what I can of the kits, and trying not to stress out…

Interview with Lisa Holley, Bejewelled Jewelry

Posted on by dianne

Lisa Holley is a member of the Starving Jewelry Artists Etsy Street Team.  The Dora, Alabama resident is helping to promote the team by featuring other members on her webjam site.

This week, it’s my turn.

Thanks Lisa!

Interview with Jewelry Report – Part 1

Posted on by dianne

I was recently contacted by Angela Neal of Jewelry Report, asking to interview me for an article.  I’m happy and grateful for the opportunity!

Part 1 of the article was posted today, and deals with selling jewelry tutorials online.

Part 2 will be published on Thursday, and I’ll post the link then.


About Jewelry Report (from the website)
The Jewelry Report is intended to be a place to find news, reviews, tools & tips, and more miscellaneous information from the jewelry making and design world, featuring articles by jewelry enthusiasts and experts.
News Science brings us new materials and designers create innovative techniques every day.  We look at hot new trends in jewelry making, along with what’s hot in jewelry fashion, and other news from the jewelry industry.  Read about how cutting edge designers are taking jewelry to new levels and discover what trends that could lead the way for the jewelry of tomorrow. Reviews There are literally thousands of jewelry related web pages on the net.  We try to bring you the best.  Our writers give their opinion on some of the best supplier sites, jewelry blogs and how-to educational sites,  as well as reviewing new jewelry making books and materials. Tools & Tips In this section our contributors share their own experiences and present some solutions to common jewelry making problems as well as offer up a few clever shortcuts to save you time and hassle. More Miscellaneous Information We bring you a random assortment of articles such as ‘Why jewelry making and cats don’t mix’, ‘How to find your signature jewelry style’, ‘The problems and pitfalls of pricing your work’ and many more jewelry related topics, all served up with a dash of humor and the wry wisdom that comes from getting it right only after getting it wrong. Happy reading and beading!

YOJ09-20 Viking Knit Ring

Posted on by dianne

YOJ09-20 Viking Knit Ring (2009)
Viking Knit Ring (2009)
Fine silver, malachite, howlite
Nalbinding, single knit, constructed, cold joined

I finally got back to writing this week!  I have six tutorials to write in preparation for my class in Haliburton in July.  So far I have completed writing the draft on one of them.  Photos and actually putting the tutorials together are still outstanding.  I’m keenly aware of how quickly the time is going, so a few weeks ago I decided to put Tigger into daycare two days as week.  That is giving me several hours of uninterrupted work time, since it co-incides with the days that Thumper is in school.  What Heaven!

Usually I make the project, writing the steps as I go.  Then I put the text aside for a week or so, come back to it and reconstruct it following my instructions.  If I stumble on any part of it, that means a rewrite is in order.   Refining continues as I take the photos and do the layout.  Lots of work… which means I gotta start makin’ like a bread truck and haul buns…

This week, I was working on instructions for viking knitting.  I experimented with incorporating 2 and 4 mm beads, which led to a screw up – err… “Design Choice” – when I went to draw the chain.  I ended up having to take the chain apart, but salvaged enough to make this ring.  It’s been an interesting experiment in timing myself as well – construction of enough chain to make a bracelet is taking a little over 2 hours.  Adding the beads was just for my amusement, and won’t be part of the final instructions.

More photos:

YOJ09-20 Viking Knit Ring (2009)
YOJ09-20 Viking Knit Ring (2009)
YOJ09-20 Viking Knit Ring (2009)

YOJ09-15 Beaded Puff Heart Pendant

Posted on by dianne

YOJ09-15 Beaded Puff Heart Pendant
Beaded Puff Heart Pendant (2009)
Sterling silver & gold-filled beads, fishline
L 2.8 cm x W 2.5 cm x D 1.0 cm
Beaded, right angle weave

This week’s project is part one of a larger piece I’m working on for an HSTA faculty exhibition to be held at the Rails End Gallery in July.

This is the first time I’ve ever tried my hand at straight beading, and I have to say that I’ve developed a very healthy respect for the people who do this type of work.  This heart was created using a pattern by “Laura” published on the 3DBeading.com site.  I initially had the foolish idea to try it using wire, but gave up after about 5 steps.  Fishline is definitely the way to go. I would love to repeat this pattern using rubies, but there’s no way to thread the fishline into the itty-bitty holes the multiple times the pattern requires.

It turned out a little bigger than I originally wanted, but the impact on the overall design will be minimal, and may actually make the final piece more interesting.

More photos:

YOJ09-15 Beaded Puff Heart Pendant
YOJ09-15 Beaded Puff Heart Pendant
YOJ09-15 Beaded Puff Heart Pendant

YOJ09-02 Standard Form Ring

Posted on by dianne

YOJ09-02 Standard Form Ring
Standard Form Ring (2009)
Sterling silver, carnelian
Size 10

I wasn’t intending to post this as my second entry for the YOJ, but it’s now Sunday, the due date for this week, and the piece I actually wanted to post isn’t finished.  I’m “tweaking”.  It feels very much like I’m doing a science experiment.

So… in the meantime…

I’m going to be teaching at Haliburton again this summer, and I have a bunch of tutorials I need to write in preparation for the class.  Last fall I proposed a second level wire jewelry course, which was accepted.  One of the projects is going to be the Standard Form Ring, aka Pharaoh’s Ring.  (Why it’s called the “Pharaoh’s Ring” is a mystery:  I haven’t been able to find any historical examples using wire.  References to cast versions, yes, wire, no…).  It’s called the “Standard Form Ring” because it’s one of the all-time classic wireworking ring patterns.  A version of this ring was published in Moods in Wire by Ellsworth Sinclair, Beginning Wirecraft by Jessie Donnan, and in the Wire Artist Jeweller Magazine (June 2003).  It’s a substantial ring, usually worn by men.  I started writing my version this week, in between printing off “printing sheets” for Number 2 Son, who likes to do “homework”.

(Edit Jun. 25/09:  Thanks to some excellent detective work by Helen Goga, a historical reference for the Standard Form Ring has been found!  Mr. Thomas Vincent Phelan received a patent for the ring design (US Des. 150,726) in August 1948.  The patent lasted for 14 years, and the design went into the public domain in 1962.)

My own personal artistic proclivities don’t lean towards classical wirework, so I haven’t made this type of ring before.  I followed the WAJ instructions for my first two attempts.  I often tell my students that they shouldn’t worry about what their first attempt looks like:  usually with the first one, you’re just trying to get your head around the steps, so clumsiness is part of the process.  It’s no different for me.  This ring was attempt number 3… and I’ll likely make at least two more in the process of refining, writing and photographing the steps for the instructions.

There are useful wireworking skills to be learned from doing this project.  There are definitely some “tricks” to getting it to look nice.  Notes are being scribbled…

Some other views:

YOJ09-02 Standard Form Ring
YOJ09-02 Standard Form Ring
YOJ09-02 Standard Form Ring
YOJ09-02 Standard Form Ring

Tutorial – Double Celtic Cross & Scrolls Earrings

Posted on by dianne

dccsblog1
dccsblog2
dccsblog3
.

.

.

.

.

.

.

.

.

At long last, a new tutorial!

Double Celtic Cross & Scrolls Earrings

I created this design back in 1998, and it’s always been very near and dear to my heart!  For those of you who love all things Celtic, these earrings combine a couple of classic Celtic elements:  crosses and scrolls!

14 pages, 63 photos, 45 steps, plus design notes

USD $10.00

Available now from my Tutorials Page.

Tutorial – QEW Earrings

Posted on by dianne

QEW EarringsQEW Earrings

Inspiration comes from the strangest places! This modern-looking pair of earrings was inspired by an Art Deco-era light standard I spied while driving along the Queen Elizabeth Way, in Toronto – and hence the name, QEW! I can’t remember exactly where it was – somewhere between High Park and the Humber Hump – only a quick glimpse, but it was enough!

9 pages, 26 photos, 22 steps, plus design notes

FREE

Available now from my Tutorials Page.

(Let me know what you think of the new tutorials format.)

Happy New Year!

Tutorial – Undercurrents Earrings

Posted on by dianne

Undercurrents EarringsUndercurrents Earrings

The surface of the ocean shows only the smallest hint of the turbulence underneath the waves! This is a great project for practicing precise measuring and mirror images.

11 pages, 35 photos, 39 steps, plus design notes

USD $5.00

This tutorial was voted “Best Advanced Tutorial” &”Favourite Piece” by the Members of the International Guild of Wire Jewelry Artists, Earring Tutorials Contest 2007. IGWJA decided to put it into the advanced category for the purposes of the contest, but in my opinion, this is an easy project.

(FREE to IGWAJ members, login to the guild’s website to access the tutorials library. Note: IGWAJ version does not include all of the design notes)

Available now from my Tutorials Page.

Tutorial – Micki Ring

Posted on by dianne

Micki RingMicki Ring

This bold, geometric design was inspired by the work of Max Froehlich (1908-1997), a Swiss-born goldsmith who was part of the “Modern” school of jewellery design. With one change, it is possible to make two variations of this ring! In heavier gauges, it makes an appealing men’s ring! The ring is named after Micki Bleily of Parma, ID, for whom it was made as a Secret Santa gift in 2002.

Project instructions contain both variations – 11 pages, 52 photos, 43 steps, plus design notes

USD $5.00

Available now from my Tutorials Page.

Other Musings

Blasts from the Past

Photo of the Day

Judith Goldstein