bridal – dianne karg baron

YOJ11-07 Butterfly Twirl Earrings

Posted on February 19, 2011March 2, 2011 by dianne

Butterfly Twirl Earrings (2011)
Sterling silver
Formed, soldered
2 cm dia.

This week I had one more idea for the butterflies – a pair of hoop earrings. Here, the butterflies fly around in a loop. The earrings insert from the back of the earlobe and curl around to bring the butterflies to the front.

It’s been a frustrating week. I went back to my projects notebook to work on one of the tutorials I wrote in the fall. I quite often write a set of instructions, then put them away for a while, so I get it completely out of my head. Then when I come back to it, I’m looking at it with fresh eyes. It lets me test whether I can follow what I wrote.

I tend to go through several attempts at making the project while I’m writing instructions, refining the design as I go and making sure the steps make sense. Because of the rising cost of silver, the prototypes for the project I’m currently reviewing were originally constructed in copper wire.

Well… that was a mistake.

Silver, even in dead soft temper, is stiffer to work that copper – a small detail I forgot to consider – so the only thing I succeeded in doing was adding to my scrap bin. I’m now revising the project so it will work in silver.

YOJ11-06 More Butterflies :)

Posted on February 11, 2011February 19, 2011 by dianne

Fluttering Butterflies (2011)
Sterling silver, aquamarine
Formed, flame-worked, cold-joined
L 4.8 cm x W 1.9 cm

This week has been very satisfying, both in terms of the pieces I’ve made and the quantity of work I was able to produce. On top of it all, I had fun!

Early in the week, I was still thinking about butterflies and how they flitter and loop around each other. That lead to this pair of earrings, and a matching pendant (not shown). With our local temperatures here still below normal, spring really cannot come too soon.

I’ll be happy to see real butterflies again.

Butterfly Drop Earrings (2011)
Sterling silver, aquamarine
Formed, flame-worked, cold-joined
L 3.8 cm x W 1.0 cm

Last year, as part of the Marquise Series, I made an earring with drops that were interchangeable. I continued that thought with these butterfly drops – the briolette can be removed and exchanged for a different drop, or can be worn plain.

The rest of the week has been devoted to other production pieces, and I’m pleased to be in a good groove!

YOJ11-05 Butterflies

Posted on February 5, 2011February 14, 2011 by dianne

Butterfly Earrings (2011)
Sterling silver
Formed, flame-worked
L 1.9 cm x W 0.5 cm

This week, after Snowpocolypse rolled through, Canada’s own Wiarton Willie brought the very welcome news that we will have a early spring this year! Woo hoo! That got me looking forward to sunshine and flowers… spring weddings and butterflies. I love watching tiny butterflies flittering around, oblivious to me being there.

I’m still in production mode, so I’m focussed on quick to make jewellery. I wanted to make something that would appeal to brides, but also to young girls. These little butterflies are lending themselves to drop earwires, like the ones shown here, but also to studs and to pendants. This is one of those rare times when the design I’ve come up with uses soldered elements. In this case, the structural requirements of the design didn’t lend itself to working cold.

I’m really looking forward to warmer weather. I’m done with the cold feet, cold hands, and sniffles that have been my constant companion since October.

YOJ11-04 In Production Mode

Posted on January 29, 2011February 15, 2011 by dianne

Aquamarine Bridal Set (2011)
Sterling silver, aquamarine
Formed, cold-joined, flameworked
Pendant: L 4.0 cm x W 1.5 cm
Earrings: L 3.8 cm x W 0.7 cm

I had such high hopes this week for getting a lot done. I did get a lot done, but very little of it related to what I wanted to be doing, which was making jewelry for restocking galleries and for an upcoming studio tour. Oh well. As we said when I was a kid: C’est la vie, c’est la guerre, c’est la pomme de terre…

I’m in production mode and working on things that can be quickly made. These earrings and pendant are part of a “Something Blue” casual/bridal line. The stone is aquamarine – a strand I picked up last fall at the GMCS show. I’m still on a buying moratorium but the icy opaqueness of the stone is part of what appealed to me. I have very little blue in my stone inventory, because most of the time, blue stones can’t withstand the punishment of tumbling.

I’m actively working through my stash of stones, so pendants and bracelets are also on their way!

YOJ10-15 Knotted Earrings 3

Posted on April 14, 2010 by dianne

Knotted Earrings 3 (2010)
Sterling silver, fine silver, tourmaline
Constructed, cold-joined
L 3.7 cm x W 0.5 cm (W 1.45″ x L 0.2″)

Continuing on from last week, since I made several of the Monkey’s Fist knots, I made another pair of earrings!

I’ve been doing some experimenting with photography lately, putting my pieces on a white background instead of the medium gray. I’m looking for ways to make the images “pop” more – in my recent work I’ve been using a lot of stones that have the same value as the background, and it makes the jewellery look dull. “Value” in colour terms refers to how light or dark it is. (To see check the value of your stone, stare at the photo with squinted eyes – if the stone disappears it has the same value as the background.) In order for a photo to have visual interest, it has to be either lighter or darker than the background, otherwise the eyes see what’s there, but the brain registers “ho hum”.

It’s a bit more work to deal with a white background – inevitably, and even though I have a white balance setting on my camera – the raw photo comes out slightly grey. Photoshop can adjust the balance it easily, but then I usually still have to do some extra clean up. It’s a bit tricky to lighten the background enough to get rid of “noise” but not so much that the jewellery bleaches out.

From a print perspective, (putting on my editor hat for a moment), getting photos with white background is a godsend for layout. I can plunk them down anywhere on a page and build text around them. Or I can crop and put several images close together – something that isn’t possible when the jewellery is shot on a grey or staged background. There are no distractions – you look at the jewellery and nothing else.

While they work for print and web, white backgrounds do *not* work well for jury photos. I had the opportunity to sit in on a jury for a show recently (something I highly recommend BTW, it’s very educational), and I noticed that the photos with white backgrounds were always very jarring. Backgrounds with a value of medium to dark (but not black) and *absolutely no props* worked best for jury photos. Prop shots work well for Etsy, but are distracting in jury.

More photos:

YOJ10-14 Knotted Earrings 2

Posted on April 10, 2010 by dianne

Knotted Earrings 2 (2010)
Sterling silver, iolite
Constructed, cold-joined
L 2.5 cm x W 0.7 cm (L 0.98″ x W 0.275″)

My life is all about choices: if I choose to focus on one area of my life, another area gets sacrificed. For the past few weeks, I’ve had to focus on some group endeavours, and so my work on YOJ projects ground to a halt. I’m working towards finding balance, but haven’t found it just yet.

For this week’s project, my focus was on making bridal jewellery. My thoughts were on “something blue” and “tying knots”.

The Monkey’s Fist is a classic macramé knot, usually used as a weight or ornament on the end of a rope. Tying them in rope is relatively easy. When I learned it as a child, it was just a matter of sticking a marble between two fingers, and wrapping the rope around the marble and fingers, then around the marble through fingers and then through the loops created by the fingers. Then the loops were pulled tight.

In wire, the stiffness of the metal, and its tendency to kink makes tying challenging. There is also the issue of trying to get the proportions right: thinner gauge wire is more flexible to tie, but the knot becomes very small and fiddly. I found it impossible to tie wire around a bead without it slipping all over the place. Pulling the loops tight at the end was also a non-starter, so I had to make the initial wraps as close to round as possible – challenging since without a bead in the centre, the tendency is to wrap ovals. I ended up creating an invent-a-tool to help.

It took a bit of practice to get consistent results (doesn’t everything?), but I did end up with a satisfying “knot”. To get the “blue” part of the earrings, I decided on adding some pale 2 mm iolites. I would love to try these in a larger gauge of wire, but I think that would really only be possible with fine silver. Sterling just gets too stiff too fast.

More photos:

YOJ10-11 Marquise Series: Bridal Earrings

Posted on March 13, 2010March 16, 2016 by dianne

Marquise Series: Bridal Earrings (Interchangeable) (2010)
Sterling silver, pearl
Constructed, cold-joined
L 4.0 cm x W 1.6 cm (L 1.57″ x W .55″)

I was sitting at my computer on Tuesday night, minding my own business, when inspiration struck! It was one of those “bolt out of the blue” ideas that forced me to get up right then, get my pliers & wire and start bending.

*Contented sigh*

I love it when that happens.

This design fulfills a long-standing desire of mine to create a pair of earrings with interchangeable bits. The pearl drops can be removed and replaced by other drops, or can be left off altogether. The result is a very versatile earring that can be worn with everything – from dressy to casual.

The sleek styling makes this an elegant earring for a wedding: With the pearl, it can be worn by the bride, or without, by her bridesmaids.

These earrings are available from my Etsy Shop.

More photos:

Zilberschmuck Retrospective April 19-May 30, 2009, at Shao Design, Toronto

Posted on March 20, 2009 by dianne

Tag Archives: bridal